Olej писал(а): ↑02 июн 2023, 02:21
И там много бинарных утилит IPv6
Код: Выделить всё
olej@R420:~$ apt content ipv6toolkit | grep /usr/sbin
/usr/sbin
/usr/sbin/blackhole6
/usr/sbin/flow6
/usr/sbin/frag6
/usr/sbin/icmp6
/usr/sbin/jumbo6
/usr/sbin/na6
/usr/sbin/ni6
/usr/sbin/ns6
/usr/sbin/path6
/usr/sbin/ra6
/usr/sbin/rd6
/usr/sbin/rs6
/usr/sbin/scan6
/usr/sbin/script6
/usr/sbin/tcp6
/usr/sbin/udp6
Код: Выделить всё
olej@R420:~$ addr6 --help
SI6 Networks' IPv6 Toolkit v2.0 (Guille)
addr6: An IPv6 address analysis and conversion tool
usage: addr6 (-i | -a) [-c | -d | -r | -s | -q] [-v] [-h]
OPTIONS:
--address, -a IPv6 address to be decoded
--stdin, -i Read IPv6 addresses from stdin (standard input)
--print-canonic, -c Print IPv6 addresses in canonic form
--print-reverse, -r Print reversed IPv6 address
--print-decode, -d Decode IPv6 addresses
--print-stats, -s Print statistics about IPv6 addresses
--print-unique, -q Discard duplicate IPv6 addresses
--accept, -j Accept IPv6 addresses from specified IPv6 prefix
--accept-type, -b Accept IPv6 addresses of specified type
--accept-scope, -k Accept IPv6 addresses of specified scope
--accept-utype, -w Accept IPv6 unicast addresses of specified type
--accept-iid, -g Accept IPv6 addresses with IIDs of specified type
--block, -J Block IPv6 addresses from specified IPv6 prefix
--block-type, -B Block IPv6 addresses of specified type
--block-scope, -K Block IPv6 addresses of specified scope
--block-utype, -W Block IPv6 unicast addresses of specified type
--block-iid, -G Block IPv6 addresses with IIDs of specified type
--verbose, -v Be verbose
--help, -h Print help for the addr6 tool
Programmed by Fernando Gont for SI6 Networks <http://www.si6networks.com>
Please send any bug reports to <fgont@si6networks.com>
Код: Выделить всё
olej@R420:~$ scan6 --help
SI6 Networks' IPv6 Toolkit v2.0 (Guille)
scan6: An advanced IPv6 scanning tool
usage: scan6 (-L | -d) [-i INTERFACE] [-s SRC_ADDR[/LEN] | -f]
[-S LINK_SRC_ADDR | -F] [-p PROBE_TYPE] [-Z PAYLOAD_SIZE] [-o SRC_PORT]
[-a DST_PORT] [-X TCP_FLAGS] [-P ADDRESS_TYPE] [-q] [-e] [-t]
[-x RETRANS] [-o TIMEOUT] [-V VM_TYPE] [-b] [-B ENCODING] [-g]
[-k IEEE_OUI] [-K VENDOR] [-m PREFIXES_FILE] [-w IIDS_FILE] [-W IID]
[-Q IPV4_PREFIX[/LEN]] [-T] [-I INC_SIZE] [-r RATE(bps|pps)] [-l]
[-z SECONDS] [-c CONFIG_FILE] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--src-address, -s IPv6 Source Address
--dst-address, -d IPv6 Destination Range or Prefix
--prefixes-file, -m Prefixes file
--link-src-address, -S Link-layer Destination Address
--probe-type, -p Probe type for host scanning {echo, unrec, all}
--port-scan, -j Port scan type and range {tcp,udp}:port_low[-port_hi]
--tcp-scan-type, -G TCP port-scanning type {syn,fin,null,xmas,ack}
--payload-size, -Z TCP/UDP Payload Size
--src-port, -o TCP/UDP Source Port
--dst-port, -a TCP/UDP Destination Port
--tcp-flags, -X TCP Flags
--print-type, -P Print address type {local, global, all}
--print-unique, -q Print only one IPv6 addresses per Ethernet address
--print-link-addr, -e Print link-layer addresses
--print-timestamp, -t Print timestamp for each alive node
--retrans, -x Number of retransmissions of each probe
--timeout, -O Timeout in seconds (default: 1 second)
--local-scan, -L Scan the local subnet
--rand-src-addr, -f Randomize the IPv6 Source Address
--rand-link-src-addr, -F Randomize the Ethernet Source Address
--tgt-virtual-machines, -V Target virtual machines
--tgt-low-byte, -b Target low-byte addresses
--tgt-ipv4, -B Target embedded-IPv4 addresses
--tgt-port, -g Target embedded-port addresses
--tgt-ieee-oui, -k Target IPv6 addresses embedding IEEE OUI
--tgt-vendor, -K Target IPv6 addresses for vendor's IEEE OUIs
--tgt-iids-file, -w Target Interface IDs (IIDs) in specified file
--tgt-iid, -W Target Interface IDs (IIDs)
--ipv4-host, -Q Host IPv4 Address/Prefix
--sort-ouis, -T Sort IEEE OUIs
--inc-size, -I Increments size
--rate-limit, -r Rate limit the address scan to specified rate
--loop, -l Send periodic probes to the specified targets
--sleep, -z Pause between periodic probes
--config-file, -c Use alternate configuration file
--help, -h Print help for the scan6 tool
--verbose, -v Be verbose
Programmed by Fernando Gont for SI6 Networks <http://www.si6networks.com>
Please send any bug reports to <fgont@si6networks.com>