Эта задача известная: установить Skype на 64-бит Linux систему.
Проблема в том, что не бывает Skype на 64-бит, а поэтому нужно ставить Skype на 32-бит + теперь к нему нужны 32-бит разделяемые библиотеки в отдельном каталоге...
Поскольку выпала такая нужда для Fedora 20, то я решил не только поставить, но и запротоколировать это дело.
Skype 64-бит
- Olej
- Писатель
- Сообщения: 21338
- Зарегистрирован: 24 сен 2011, 14:22
- Откуда: Харьков
- Контактная информация:
Re: Skype 64-бит
Skype RPM берём здесь: http://www.skype.com/ru/download-skype/ ... -computer/
В выпадающем списке выбираем свой дистрибутив:
(tar.bz2 - это независимый от дистрибутива каталог ... Skype на самом деле не требует инсталляции, только размещение каталога).
Инструкция по установке Skype для Fedora 18 https://ask.fedoraproject.org/en/questi ... all-skype/ ... там есть некоторые дополнения ...
Но сделаем немного по-другому...
Но сейчас Skype (32-бит) можно установить и из репозитария прямо:
Думаю, что так будет надёжнее:
Облом-с
В выпадающем списке выбираем свой дистрибутив:
Код: Выделить всё
[Olej@modules Skype]$ ls -l
итого 30400
-rw-r--r--. 1 Olej Olej 15666841 мар 20 18:35 skype-4.2.0.13-fedora.i586.rpm
-rw-r--r--. 1 Olej Olej 15459189 мар 20 18:33 skype-4.2.0.13.tar.bz2
Инструкция по установке Skype для Fedora 18 https://ask.fedoraproject.org/en/questi ... all-skype/ ... там есть некоторые дополнения ...
Но сделаем немного по-другому...
Но сейчас Skype (32-бит) можно установить и из репозитария прямо:
Код: Выделить всё
[Olej@modules etc]$ yum list skype*
Загружены модули: langpacks, refresh-packagekit
Доступные пакеты
skype.i586 4.2.0.13-1.R russianfedora-nonfree-updates
Код: Выделить всё
[root@modules ~]# yum install skype
Загружены модули: langpacks, refresh-packagekit
Разрешение зависимостей
--> Проверка сценария
...
--> Обработка зависимостей: /usr/lib/libpulse.so.0 пакета: skype-4.2.0.13-1.R.i586
fedora/20/x86_64/filelists_db | 27 MB 00:00:54
rpmfusion-free/20/x86_64/filelists_db | 325 kB 00:00:05
rpmfusion-free-updates/20/x86_64/filelists_db | 107 kB 00:00:00
rpmfusion-nonfree/20/x86_64/filelists_db | 218 kB 00:00:00
http://download1.rpmfusion.org/nonfree/fedora/updates/20/x86_64/repodata/df6f35f58657098c99848ce2fb9c472da3e5496deb82599f8661cc4962f15439-filelists.sqlite.bz2: [Errno 14] HTTP Error 404 - Not Found
Пробуем другое зеркало.
...
http://ftp.icm.edu.pl/pub/Linux/distributions/rpmfusion/nonfree/fedora/updates/20/x86_64/repodata/df6f35f58657098c99848ce2fb9c472da3e5496deb82599f8661cc4962f15439-filelists.sqlite.bz2: [Errno 14] HTTP Error 404 - Not Found
Пробуем другое зеркало.
One of the configured repositories failed (RPM Fusion for Fedora 20 - Nonfree - Updates),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Disable the repository, so yum won't use it by default. Yum will then
just ignore the repository until you permanently enable it again or use
--enablerepo for temporary usage:
yum-config-manager --disable rpmfusion-nonfree-updates
4. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=rpmfusion-nonfree-updates.skip_if_unavailable=true
Кто сейчас на конференции
Сейчас этот форум просматривают: Majestic-12 [Bot] и 4 гостя